Names And Functions Of Parts; In Case Of Difficulty - Kenwood KRF-V6030D Instruction Manual

Names and functions of parts

Speaker indicators
SP
CLIP
RDS
MUTE indicator
RDS indicators
MULTI CONTROL
STANDBY
ON/STANDBY
POWER
ON OFF
PHONES
1
Use to turn the main power ON/OFF.
2
Use to switch the power ON/STANDBY when
the POWER is turned ON.
3
KRF-V7030D
Used to make a variety of settings.
3
KRF-V6030D/V5030D/V4530D
Used to make a variety of settings.
4
Use to select the surround sound settings.
5
KRF-V7030D
Lights when the receiver is in the DTS mode.
Lights when the receiver is in the Dolby Digital
mode.
Lights when the receiver is in the PROLOGIC
mode.
Standby mode
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit's internal circuitry to back up the memory. This condition is
referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.
Frequency display,
Input display,
Preset channel display,
Surround mode display
A B TI.VOL
L C R
MUTE
LFE SW
PTY
LS S RS
Speaker selection indicators
Input channel indicators
Output channel indicators
For KRF-V6030D,
KRF-V5030D,
KRF-V4530D
DOLBY
DIGITAL PROLOGIC
MULTI CONTROL DTS
A SPEAKERS B
SPEAKER MUTE For
KRF-V5030D,
KRF-V4530D
%
Lights when the receiver is in the 3 STEREO
%
mode.
KRF-V7030D
Lights when the receiver is in the DOWN MIX
%
mode.
6
Use to switch between the digital and analog
%
inputs.
7
Use to adjust the brightness of the display.
%
Use to select the REC MODE.
8
Use to monitor the source that is connected to
§
the VIDEO2/MONITOR jack.
9
0
∞
Use for headphone listening.
!
∞
Use to turn the A/B speakers ON/OFF.
AUTO SOUND indicator
Band indicators
DOWN MIX indicator
Display
3 STEREO
DOLBY
DIGITAL PROLOGIC 3 STEREO DOWN MIX INPUT SELECTOR
SET UP INPUT MODE DIMMER MONITOR
SOUND LISTEN MODE SOURCE DIRECT
BAND AUTO MEMORY
∞
§
0
(¶
*
&
*
^
PRO LOGIC
indicator
DIGITAL indicator
S.DIRECT indicator
AUTO indicator
FM AUTO SOUND DIGITAL AUTO
MEMO. indicator
AM PRO LOGIC S.DIRECT MEMO.
MHz 3 STEREO MONITOR ST.
ST. indicator
TUNED
kHz DOWN MIX DSP
TUNED indicator
MONITOR indicator
3 STEREO indicator
STEREO indicator
VOLUME CONTROL
DOWN
S-VIDEO V AV AUX L – AUDIO – R
For KRF-V7030D
!
Use to turn the speaker ON/OFF.
Use to temporarily mute the sound.
@
Use to adjust the sound quality and ambience
effects.
#
Use to select the broadcast band.
$
Use to select the auto tuning mode.
%
Use to select the listening mode.
^
Use to store radio stations in the preset memory.
&
Use to pass the source material direct to the
amplifier.
*
Use to select the input sources.
(
For KRF-V7030D
5
UP
^
*
¶
)
)
∞
¡
*
&
!