Names And Functions Of Parts; Main Unit - Kenwood KRF-V5300D Instruction Manual

Names and functions of parts

Main unit

PTY indicator
Speaker indicator RDS indicator
CLIP indicator
MUTE
indicator
TONE indicator
TUNED indicator
ST. indicator
Input channel status indicator
DOLBY DIGITAL
SPEAKERS ON/OFF
LISTEN MODE
PHONES
1
(power) key
Standby indicator
Switch the unit ON and standby.
When the unit is in standby mode, the
standby indicator is lit.
2
Surround LED indicators
DOLBY DIGITAL indicator
Light when this unit is in the Dolby
Digital mode.
DTS indicator
Light when in the DTS mode.
ACTIVE EQ indicator
Light when in the ACTIVE EQ mode.
3
Remote sensor
4
VOLUME CONTROL knob
5
PHONES jack
Use for headphone listening.
6
SPEAKERS ON/OFF key
Use to turn the speakers ON/OFF.
7
LISTEN MODE key
Use to select the listen mode.
Frequency display,
Input display,
Preset channel display,
AUTO indicator
Surround mode display
DTS ACTIVE EQ
MULTI CONTROL
SETUP BAND AUTO/MONO ACTIVE EQ INPUT MODE
8
SETUP key
Use to select the speakers' settings
etc.
9
MULTI CONTROL knob
Use to control a variety of settings.
0
BAND key
Use to select the broadcast band.
!
AUTO/MONO key
Use to select the auto tuning or
manual tuning mode.
Use to select a recording mode. ⁄
@
ACTIVE EQ key
Use to select ACTIVE EQ setting.
#
INPUT MODE key
Use to switch between full auto,
digital and analog inputs.
$
INPUT SELECTOR knob
Use to select the input sources.
%
PURE AUDIO MODE key
PURE AUDIO MODE indicator
∞
Use to select PURE AUDIO MODE.
When this mode is on, the PURE
AUDIO MODE indicator is lit.
DIGITAL indicator
Band indicators
DOLBY DIGITAL
indicator
PRO LOGIC
indicator
Display
INPUT SELECTOR
&
¶
™
)
¡
AUTO DETECT indicator
DSP MODE
indicator
6CH INPUT indicator
DTS indicator
VOLUME CONTROL
PURE AUDIO MODE
AV AUX
PURE AUDIO MODE
VIDEO L-AUDIO-R
^
AV AUX key
Use to select AV AUX source.
&
AV AUX jack
Use to connect a device such as a
camcorder and a game player.
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.
5
English