Listening To A Source Component; Adjusting The Sound; Adjusting The Tone; Once-Touch Low Frequency Emphasis (Bass Boost) - Kenwood VR-507 Instruction Manual

VOLUME CONTROL
46,
VOLUME -
INPUT
SELECTOR
RGR0720
RC-R0613
q Use;;; ;~Pf~ELFCTOR knob fo selecf the source you
The Input sources change as shown below:
Selecting a source using the INPUT SELECTOR knob.
I
0 "PHONO"
@ "TUNER"
0 "CDIDVD"
@ "TAPE" or "MD"
@ "VIDEOl"
0 "VIDEOZ"
0 "VIDE03"
@ "DVD/Gch"
@I "AV AUX"
RC-R0613
RGR0720
You can adjust the sound quality when the receiver IS In the PCM stereo
and analog stereo mode.
0 Press the SOUND key to select the tone mode to be adjusted.
BASS:Select this to adjust the low frequency range.
(Press the SOUND key once.)
TREB: Select this to adjust the high frequency range.
(Press the SOUND key twice.)
m Sfart playback from the selected source.
SPIB
l3OEl
I
..... ..... . :. .... .....
0 b
.... . : ....
...... ..::
........ S,ERiO
m Use the VOLUME CONTROL knob or VOLUME keys to 0 Use the MULTI CONTROL knob or keys to adjust the sound
adjust the volume.
quality.
URCE DIRECT
PHONES
VOLUME CONTROL
SOUND
l
The bass and treble levels are adjustable from -1 OdB to +l OdB In 2
step Increments.
l
The adjustment item IS displayed for approximately 8 seconds.
You can adjust the sound quality when the receiver
IS
in the PCM stereo
and analog stereo modes.
Press the B. BOOST or BASS BOOST key.
l
Press the key once to select the maximum (tl OdB) low frequency
emphasis setting.
l
This key does not function when the receiver
IS
In the sound quality or
ambience effects adjustment mode.
Switchrng back to fhe prevrous setting
Press the B. BOOST or BASS BOOST key agam.