Connecting The System Control; System Control Operations; Registering Setup Codes For Kenwood Audio Components - Kenwood VR-507 Instruction Manual

Connecting system control cords after connecting a KENWOOD
nudio component system lets you take advantage of convement
system control operations.
Thus unit IS compatible only with the [SL-161 mode. The system
control operation IS not available if the unit IS connected m the
[XSS], [XS], or [XR] connection mode.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
&%~ C-P
w
SYSTEM CONTROL
cord
* You may connect the system control cord to either the left or right Jack.
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control
mode.
m [XS] [XS8] [XR]
SYSTEM
CONTROL
cord
[u [XS] [XS8]
l
In order to take advantage of the system control operations, the
components must be connected to the correct jacks. To use a CD
player it must be connected to the CD lacks. To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks. When
usrng more than one CD player (etc.) only the one connected to the
specified Jacks may be connected for system control.
l
Some CD players and cassette decks are not compatible with the
[SL16] system control mode. Do not make system connections with
equrpment that IS not [SL16] compatible.
l
Some MD players are not system control compatible. You cannot
make system control connections to thus krnd of equrpment.
Notes
1. [SL16] equrpment cannot be combrned with [XR], KS], and [XSS]
equrpment for system operations. If your equipment consrsts of this
krnd of combrnation, please do not connect any system control cords.
Even without system control cords, normal operations can be carned
out without effecting performance.
2. Do not connect system control cords to any components other than
those specified by KENWOOD. It may cause a malfunction and
damage your equrpment.
3. Be sure the system control plugs are Inserted all the way In to the
system control termrnals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate thus unit with the system remote supplied with the
receiver.
Automatic Operation
When you start playback from a source component, the Input selector
on thus unit switches to that component automatically.
Synchronized Recording
Lets you synchronrze recording with the start of playback when record-
rng from CD, MD or analog discs.
Regrstermg setup codes for KENWOOO audio components
If you own remote controllable KENWOOD audio components that are
not compatible with system control, regrstenng the setup code enables
you to control those components usrng the remote control supplied with
thus unit (without connecting system control cords). To regrster setup
codes for your remote controllable KENWOOD audio components, see
"Regrstenng setup codes for other components"