Names And Functions Of Parts - Kenwood RV-7000 Instruction Manual

Names and functions of parts

Main unit Main unit
1
(Power) key
Standby indicator
Press to switch this unit ON or to put it
to standby.
The standby indicator lights in the
standby mode.
2
Display
3
DOLBY VIRTUAL SPEAKER
indicator (RA-5000 only)
4
Remote sensor
5
VOLUME CONTROL knob
6
PHONES jack
Use for headphone listening.
7
SPEAKERS ON/OFF key
Press to turn the speakers ON/OFF.
8
INPUT SELECTOR ∞/5 key
Press to select the input source.
9
BAND key
Press to select the broadcasting band.
0
AUTO/MONO key
Press to switch the radio tuning mode
between auto tuning and manual
tuning.
!
INPUT MODE key
Press to select the input mode.
@
SETUP key
Press to set up this unit.
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 9
#
Illumination
$
MULTI CONTROL ∞/5 key
Press to select a setting item.
TUNING key
Press to select a radio station.
%
RV-7000/RV-6000:
EASY SETUP key
Use for Easy Setup of the speakers.
RA-5000:
TONE key
Press to adjust the tone.
^
RV-7000/RV-6000:
LISTEN MODE key
Press to select the listen mode.
fl
RA-5000:
DIMMER key
Press to switch the brightness of the
display and indicators.
e
&
RV-7000/RV-6000:
VIRTUAL SURROUND key w
e
Press to switch the Virtual Surround
function ON/OFF.
RA-5000:
DOLBY VIRTUAL SPEAKER key
fl
Press to switch the Dolby Virtual
ª
Speaker function ON/OFF.
*
PURE AUDIO MODE key
Press to switch the STRAIGHT DECODE
MODE/PURE AUDIO MODE ON/OFF.
(RV-7000/RV-6000)
Press to switch the PURE AUDIO
MODE ON/OFF. (RA-5000)
(
AV AUX jacks
•
Connect a video camera, videogame
machine, etc.
i
Standby mode
While the standby indicator is lit, a small
q
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
W
control unit.
w
°
9
English
1 0 . 8 . 3 1 1 : 0 7 : 3 8 A M