Names And Functions Of Parts; Main Unit - Kenwood KRF-V6200D Instruction Manual

Names and functions of parts

Main unit

PTY indicator
Speaker indicator RDS indicator
CLIP indicator
MUTE
indicator
TONE indicator
TUNED indicator
ST. indicator
Input channel status indicator
DOLBY DIGITAL
SPEAKERS A/B/OFF
LISTEN MODE
PHONES
1
(power) key
Standby indicator
Switch the unit ON and standby.
When the unit is in standby mode, the
standby indicator is lit.
2
Surround LED indicators
DOLBY DIGITAL indicator
Light when this unit is in the Dolby
Digital mode.
DTS indicator
Light when in the DTS mode.
ACTIVE EQ indicator
Light when in the ACTIVE EQ mode.
SPEAKERS B indicator
Light when the speakers connected to
SPEAKER B jacks are in use.
3
Remote sensor
4
VOLUME CONTROL knob
5
PHONES jack
Use for headphone listening.
6
SPEAKERS A/B/OFF key
Use to select the front speaker, or
select not to use the front speaker.
7
LISTEN MODE key
Use to select the listen mode.
Frequency display,
Input display,
Preset channel display,
AUTO indicator
Surround mode display
DTS ACTIVE EQ SPEAKRS B
MULTI CONTROL
SETUP BAND AUTO/MONO ACTIVE EQ INPUT MODE
8
SETUP key
Use to select the speakers' settings
etc.
9
MULTI CONTROL knob
Use to control a variety of settings.
4/¢ knob
Use to skip the file of the USB source
backwards/forwards.
Use to select the radio station. ¤
0
BAND key
Use to select the broadcast band.
6 key
Use to play/pause the USB source.
!
AUTO/MONO key
Use to select the auto tuning or
manual tuning mode.
Use to select a recording mode. fl
7 key
Use to stop playing the USB source.
@
ACTIVE EQ key
Use to select ACTIVE EQ setting.
#
INPUT MODE key
Use to switch between full auto,
º
digital and analog inputs.
DIGITAL indicator
Band indicators
DOLBY DIGITAL /
DOLBY DIGITAL EX
indicator
PRO LOGIC
indicator
Display
INPUT SELECTOR
(
¢
¢
¤
§
™
AUTO DETECT indicator
DSP MODE
indicator
Neo:6 indicator
VOLUME CONTROL
PURE AUDIO MODE
USB/AV AUX
PURE AUDIO MODE
VIDEO L-AUDIO-R
$
INPUT SELECTOR knob
Use to select the input sources.
%
PURE AUDIO MODE key
PURE AUDIO MODE indicator
Use to select PURE AUDIO MODE.
When this mode is on, the PURE
AUDIO MODE indicator is lit.
^
USB/AV AUX key
Use to select USB or AV AUX source.
&
AV AUX jack
Use to connect a device such as a
camcorder and a game player.
*
USB jack
Use to connect a USB device such as
a flash memory and a digital audio
player.
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.
6CH INPUT indicator
DTS / DTS-ES
indicator
DISCRETE 6.1
indicator
MATRIX 6.1
indicator
USB
£
5
English