Intermec EasyCoder 4420 User Manual page 103

Memory
Base Optional
1MB of DRAM 8 or 16 MB DRAM SIMM modules
128K of flash 8 to 16 MB Kanji/Katakana flash SIMM module
Printhead
Printed dot size
Width
Resolution
Number of elements
"X" dimensions
Printing Method
The printers are capable of direct thermal (DT) printing or thermal transfer (TTR)
printing using a thermal transfer ribbon.
Printing Speed
Maximum 254 mm per second (10 inches per second), on specified media only
Minimum 51 mm per second (2 inches per second)
The print speed can be changed in 1 ips increments only. Note that the printer cannot
print at 228.6 mps (9 ips).
Ribbon Specifications
Length 450 m (18,000 linear inches)
Widths 54 mm (2.1 inches)
76 mm (3.0 inches)
104 mm (4.1 inches)
114 mm (4.5 inches)
Diameter 81 mm (3.2 inches) maximum
4420 0.127 mm (0.00492 in square)
4440 0.065 mm (0.00246 in square)
112 mm maximum (4.4 in)
4420 8 dots per mm (203 dots per in)
4440 16 dots per mm (406 dots per in)
4420 896 per printhead
4440 1792 per printhead
4420 10 mil to 500 mil (0.25 mm to 12.7 mm); 5 mil (0.13
mm) in drag mode only (specified media only)
4440 5 mil to 500 mil (0.127 mm to 12.7 mm) (specified
media only); 2.5 mil (0.06 mm) in drag mode only (specified
media only)
A
Specifications
A-5