Using The 3 Stay Key - Honeywell ADEMCO VISTA-120 User Manual

Using the 3 STAY key

Use this key when you are staying home, but might expect someone to use
the entrance door later.
When armed in STAY mode, the system will sound an alarm if a protected
door or window is opened, but you may otherwise move freely throughout the
premises. Late arrivals can enter through the entrance door without causing
an alarm, but they must disarm the system within the entry delay period or
an alarm will occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
1. Enter your security code and press
2.
NOTE: Failure to close an open exit route zone before the exit delay time
ends may result in that zone being automatically bypassed or in alarm,
depending on how your system was programmed by your installer Consult
your installer for the configuration of your system.
ARMED ***STAY*
ZONE BYPASSED
Arming Perimeter Only
STAY
3 .
The keypad beeps three times, displays the
armed message.
Note: "ZONE BYPASSED" in this display
simply indicates that some zones of protection
are not armed when using STAY mode.
(With Entry Delay ON)
–33 –