Honeywell ADEMCO VISTA-120 User Manual page 63

Quick Guide To System Functions (cont'd)
FUNCTION PROCEDURE
Delete a User Enter master/manager code.
Press CODE [8].
Enter user no. to be deleted.
Enter master/manager code.
Press 1 (Yes) at prompt.
Access Control Enter security code. Enter 0.
Enter security code
Press [#]. Enter 73.
Enter security code
Press [#]. Enter 74.
Enter access point number.
Enter security code. Press [#].
Enter 75. Enter access point
number.
Enter state (1-3)
Panel Linking Enter security code (002-050)
Press [#]. Enter 86.
Enter security code (002-050)
Press [#]. Enter 85.
Enter security code (002-050)
Press [#]. Enter 88.
Enter security code (002-050)
Press [#]. Enter 87.
Enter 0.
COMMENTS
Master & Manager level users can delete users.
A user can only be deleted by a user with
higher authority level.
Activate access relay for current partition.
Request to enter or exit at a console.
Request to enter or exit at an access point.
Change the access point state.
Activate single-panel single-partition mode.
Exit single-panel single-partition mode.
Activate multi-partition multi-panel mode.
Activate multi-panel view mode.
Exit multi-partition multi-panel mode and multi-
panel view mode.
– 63 –