Programming Device Timers; General Information - Honeywell ADEMCO VISTA-120 User Manual

General Information

Device timers consist of an ON time & an OFF time, and selected days of the
week in which they are active. There are up to 20 timers that can be used to
control various devices, such as lights or appliances. Your installer will have
programmed the appropriate devices into the system (up to 96 devices can be
programmed).
Each timer controls a single device (designated as an output number) that
you select. For example, timer 1 might be set to turn the outside lights on at
19:00 and turn them off at 05:00. Timer 2 might turn on the air conditioner
Monday-Friday at 08:30 to cool the premises before you arrive at 09:00, and
turn it off at 18:00 when you are leaving at night. If desired, different timers
can control the same device. For example, timer 2 could be used Monday-
Friday as in the previous example, and timer 3 could be set to turn the air
conditioner on and off at different times on Saturday.
To enter the device timer menu mode:
Enter your security code, then press the # key followed by 83.
OUTPUT TIMER # ?
01-20,00=QUIT 01
06 19:00 05:00
EXTER LITE
See your installer for
00 ENTER OUTPUT#
device numbers.

Programming Device Timers

Up to 20 timers can be programmed. Each timer
is identified by a number 1-20. Enter the desired
timer number to be programmed (1-20). Press *
to accept entry.
If that timer
programmed, a summary screen will appear. In
04
this example:
06 = Timer #
04 = Output Device # affected by this timer
EXTER LITE = Output Descriptor for Device 4
19:00 = Start Time;
05:00 = Stop Time
Press * to continue.
Enter the desired output device number (1-96).
As the number is entered, the device's description
00
will appear.
To delete a previously programmed timer, enter
00 as the output number.
number has already been
– 49 –