Arming All Protection; Using The 2 Away Key - Honeywell ADEMCO VISTA-120 User Manual

Using the 2 AWAY Key

Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a protected
door or window is opened, or if any movement is detected inside the premises.
You may leave through the entrance door during the exit delay period
without causing an alarm. You may also reenter through the entrance door,
but must disarm the system within the entry delay period or an alarm will
occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
1. Enter your security code and press
2.
YOU MAY EXIT NOW
NOTE: Failure to close an open exit route zone before the exit delay time
ends may result in that zone being automatically bypassed or in alarm,
depending on how your system was programmed by your installer Consult
your installer for the configuration of your system.
ARMED **AWAY**

Arming All Protection

AWAY
2 .
The keypad will beep twice and will display the
armed message.
Note: The "YOU MAY EXIT NOW" portion of
the message disappears when exit delay
expires.
(With Entry Delay ON)
–35 –