Enabling The Start Up Wizard; Configuring The Auto Logout Time - Lorex LNR300 Instruction Manual

2 Use the Mouse Pointer Speed slider to adjust how fast the mouse moves on screen.
3 Click Apply to save changes. Right-click repeatedly to return to live view.

Enabling the Start Up Wizard

The Start Up Wizard is an optional wizard that helps you set up system settings when the
NVR powers on.
To enable the Start Up Wizard:
1 Right-click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configuration.
4 Check Enable Wizard to enable the Start Up Wizard when the NVR powers on or un-check to
disable.
5 Click Apply to save changes. Right-click repeatedly to return to live view. When the NVR
starts up, the Start Up Wizard guides you through setting up key system settings.

Configuring the Auto Logout Time

The Auto Logout time determines how long menus will remain open while the system is
idle.
If passwords are enabled, the user will also be logged out if the system is idle for the Auto
Logout time.
To configure the Auto Logout Time:
1 Right-click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
Select the mouse cursor speed
Check to enable the Start-up wizard
Configuration
67