Ptz Control (Not Supported); Network Connection (Not Supported); System Configuration; General - Lorex LNR300 Instruction Manual

5 Under Warning, check to enable the following warnings when the Video Loss Alarm is
triggered:
• Full Screen Monitoring: The selected channel will open in full screen.
• Audible Warning: System will beep.
• Notify Surveillance Center: An alert will be sent to the client software.
• Send Email: An alert email will be sent. Note that you must set up email alerts.
6 Click Save to save changes.

PTZ Control (Not Supported)

Network Connection (Not Supported)

System Configuration

The System Configuration menu allows you to configure settings for the Client Software.
To access System Configuration:
• From the Control Panel, click System Configuration (

General

To configure General client options:
1 Configure the following:
• Interval of Screen Switching: Select the time channels will be shown in Main View before
switching when Sequence mode is on.
• Log Keeping Time: Select the amount of time the client software will retain system logs.
• View Scale: Select the aspect ratio for your cameras: Full-screen (may cause image
stretching), 4:3, or 16:9.
• Network Performance: Select Low, Middle, or High.
• CPU Performance: Select Low, Middle, or High.
Client Software for PC or Mac
).
129