Appendix D: Connecting To Your Nvr Using A Web Browser; Connecting To Your Nvr Using A Ddns Or Local Ip Address; Connecting Using Internet Explorer - Lorex LNR300 Instruction Manual

Appendix D: Connecting to your NVR Using a Web Browser

Appendix D: Connecting to your NVR Using a Web
Browser
The NVR includes a built in web browser software. You can connect to your NVR in Internet
Explorer 8 and above, Apple Safari, Mozilla Firefox, and Google Chrome.
NOTE: In order to connect to your NVR using a web browser, you must complete port
forwarding and DDNS setup. Complete all the steps under "Appendix C: DDNS Setup
(Advanced)" on page 160.

Connecting to your NVR Using a DDNS or Local IP Address

You must enter your NVR's DDNS or Local IP address in the address bar to connect using
a web browser.
• A DDNS address is formatted http://, the Domain Name/URL Request you received in the
email after registering for your DDNS account, followed by .lorexddns.net, colon (:), and the
HTTP port of your NVR (e.g.
to connect to your NVR over the Internet.
• The local IP address is formatted http://, the IP address (can be found by right-clicking and
selecting Information), colon (:), and the HTTP port of your NVR (e.g. 
http://192.168.50.219:80
own local network.

Connecting Using Internet Explorer

NOTE: The steps below describe how to connect to the NVR in Internet Explorer 9 or 10. The
steps may vary for earlier versions of Internet Explorer.
170
http://tomsmith.lorexddns.net:80
). You may only connect to the local IP address of the NVR within your
). A DDNS address is required