General; Camera - Lorex LNR300 Instruction Manual

General

The General sub-menu allows you to configure general system settings.
To configure general settings:
1 Configure the following:
• Device Name: Enter a name for your NVR.
• Device No.: Enter the ID for the remote control. For details, see "Pairing the Remote Control"
on page 68.
• Record Replace: Select Yes to enable overwrite, or select No to disable overwrite.
• Syncronous IPC: Make sure this is checked.
2 Click Save to save changes.

Camera

NOTE: Do not change any settings in this sub-menu. To configure camera settings, see
"Camera Settings" on page 117.
Client Software for PC or Mac
111