Table of Contents
Advertisement
To configure the Pre-Record and Post-Record times:
1
Right-click and then click Menu.
2
Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3
Click Record>Recording Setup.
4
Under Camera, select the camera you would like to modify.
5
Under Pre-record, select the time the NVR will record before an event.
6
Under Post-record, select the time the NVR will record after an event.
7
Click Apply to save changes. Right-click repeatedly to return to live view.
Configuring Substream Settings
Substream settings allow you to configure the video quality settings for streaming to a
computer or mobile device. The substream allows you to conserve Internet bandwidth for
connections over the LAN or Internet while still ensuring high quality recordings.
NOTE: Increasing the substream settings may affect the performance of the video stream,
depending on bandwidth available.
To configure substream settings:
1
Right-click and then click Menu.
2
Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3
Click Record>Recording Setup>Substream.
4
Under Camera, select the camera you would like to configure.
5
Under Resolution, select the resolution to use for streaming: 704*576(4CIF), 352*288(CIF),
320*240(QVGA).
Select camera
Select pre-record time
Select post-record time
Record
53
- Quick Links:
- Default System Password & Port Numbers
Hide quick links:
Advertisement
Table of Contents
