Table of Contents
Advertisement
Camera
3
Click Camera>Motion.
4
Under Camera, select the camera you would like to configure.
5
Click
under Action to open the Action menu.
6
In the Trigger Channel tab, select which channels that will start to record when motion
detection is triggered on the selected channel. For example, if you want channels 1 and 2 to
record when motion is detected on channel 1, select channel 1 and click
and D2 in Trigger Channel.
7
In the Arming Schedule tab, configure the times of day you would like motion detection to be
enabled for the selected channel. By default, motion detection is enabled 24/7.
• Under Week, select the day of the week you would like to configure.
• Configure up to 8 time periods per day when motion detection will be enabled.
60
Click to open the Action menu
Check channels that will record when
the selected channel detects motion
, then check D1
- Quick Links:
- Default System Password & Port Numbers
Hide quick links:
Advertisement
Table of Contents
