Configuring Motion Detection Alarm Settings - Lorex LNR300 Instruction Manual

5 Check Enable Motion Detection to enable motion detection or un-check to disable.
6 Adjust the Sensitivity slider to configure motion detection sensitivity.
7 In the image area, configure motion detection areas:
• Areas where the grid is filled in are enabled for motion detection.
• Click and drag to enable/disable areas of the screen for motion detection.
• Click Full Screen to enable the entire area for motion detection.
• Click Clear to disable the entire area for motion detection.
8 Click Apply to save changes. Right-click repeatedly to return to live view.

Configuring Motion Detection Alarm Settings

You can configure the alarm actions that occur when motion detection is triggered.
To configure motion detection alarm settings:
1 Right-click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
Select camera
Enable motion detection
Adjust motion detection senstiivity
Enable whole screen
Disable whole screen
Click and drag to enable/
disable motion areas
Camera
59