Setting The Date And Time - Lorex LNR300 Instruction Manual

Setting the Date and Time

To set the date and time:
1 Right-click to open the Quick Menu and then click Menu.
2 Enter the NVR's user name (default: admin) and password (default: 000000) and click OK.
3 Click Configuration.
4 Under Time Zone, select your Time Zone.
5 Click System Date and then use the on-screen calendar to select the current date.
19
It is highly recommended to set the date and time when first
setting up your system.
Inaccurate time stamps may render your footage unusable for
court evidence.
Select your Time Zone
Click System Date and use
the calendar to select the
current date