Recommended Frame Rate And Bitrate Per Number Of Channels; Configuring The Pre-Record And Post-Record Times - Lorex LNR300 Instruction Manual

Record
• Under Frame Rate, select the recording frame rate.
• Under Max Bitrate, select the bitrate that will be used for video streaming in Kbps. It is
recommended to select a value within the range shown under Max. Bitrate Range
Recommended.
6 Configure the above settings under Mainstream (Motion) to set the parameters for motion
recording.
7 (Optional) Use the Copy button to copy the selected settings to other channels. A warning
message may appear when copying settings to unconnected channels, but the NVR will copy
settings to all connected channels.
8 Click Apply to save changes. Right-click repeatedly to return to live viewing.
NOTE: If you get a "Bandwidth Exceeded" message, it is because you have set the combined
bitrate or framerate for all your cameras higher than the NVR can process. It is
recommended to set the bitrate and framerate to the following settings, based on the
number of channels your NVR has:

Recommended Frame Rate and Bitrate per Number of Channels

Number of Channels
4 channels
8 channels
16 channels

Configuring the Pre-Record and Post-Record Times

The NVR supports pre-recording to record video from before events (such as motion or
video loss) occur. The Pre-Record time determines how long the NVR will record before an
event occurs.
The Post-Record time determines how long the NVR will record after an event occurs.
52
Frame Rate (frames per second)
30
30
15
Select camera
Enter image quality settings for
motion recording
Enter image quality settings for
continuous recording
Bitrate (Kbps)
8192
4096
3200