ETC microVision FX User Manual page 164

7 - 32
Page
MicroVision FX has five pages of submasters. Each page can hold six
submaster memories.
MicroVision FX displays the message Submaster Page: 1 on the
Submaster/cue description line to indicate which page is currently active.
To switch pages, press [Page], and enter the new page number. The
message indicates the new page number.
Any submasters set at a level above zero when you load a new page
remain on stage until you pull them down to zero. MicroVision FX
indicates that a submaster is recorded in a page other than the currently
loaded page by displaying and highlighting the page number under the
submaster number.
Submasters from the new page are not loaded until you pull the pot
down to zero. The Submaster/cue display line indicates from which page
each submaster on stage was loaded. For example, you might have
submaster 1 loaded from page 3, submaster 2 from page 3, et cetera.
[Page] also allows you to create a submaster while one page is loaded,
and to record it on another submaster page. To do so, follow these
steps:
1. Create a look.
2. Press [Record].
3. Press [Page], and enter the page number you want the submaster
4. Press the submaster bump switch in which you want to record look.
Example
[Record] [Page], entering page number, and pressing a bump switch
records a submaster on the submaster page you designate.
recorded on.
MicroVision FX