ETC microVision FX User Manual page 92

4 - 50
To track the level modification we just recorded in the example above
use [Track] instead of [Record] to record channel one as on the previous
page. Press [Track], enter cue number, and press [Enter]. If you use
[Track] rather than [Record] to record the changes made to the cue
illustrated in Figure 1, the results will be as illustrated in Figure 3 (versus
the results from using [Record] illustrated in Figure 2).
Figure 3
The modified level is recorded in the current cue and carries through the
entire track (cues 1 through 3).
Cue 1 Cue 2 Cue 3 Cue 4 Cue 5
Channel 1 50
Channel 2
Channel 3
Channel 4
Channel 5
FF FF 25
FF FF FF
FF FF
FF
FX
MicroVision
00
00
00
00