Display
When operating in MANUAL mode, programmes are not used
– the profile indicator is not displayed, and the set temperature
is fixed to the temperature selected by the user.
The images below show the PH60 operation in MANUAL mode
with the set temperature in 'Comfort', 'Econ', 'Party', 'Holiday'
and 'Frost' modes:
Changing Control Mode
Pressing the AUTO/MANUAL key when the PH60 is in
NORMAL mode will allow you to change between automatic
control and the six manual control modes. Pressing the + or –
keys allow you to change the set temperature:
14
Operation
In this example, the PH60 is set to operate
in 'Comfort' mode.
The temperature mode indicator will flash if
temporary override mode has been selected.
In this example, the PH60 is set
to operate in 'Econ' mode.
PH60 INSTRUCTION MANUAL