Maintenance - Salus PH60 Instruction Manual

ENERGY TIP
One way to set and use your heating system is to find the
lowest temperature setting that you are comfortable with in
each room, and then leave it set at this temperature. You can
do this by setting the PH60 to a low temperature, (for example
17 °C) and then increasing the setting by one degree each day
until you are comfortable with the room temperature - you
won't have to adjust the thermostat further, as adjustment
above this setting will waste energy - a 1 °C increase in
temperature is equal to 3% of your heating costs.

MAINTENANCE

The PH60 programmable TRV controller requires no special
maintenance. Periodically, the outer casing can be wiped clean
using a dry cloth (please DO NOT use solvents, polishes,
detergents or abrasive cleaners, as these can damage the
controller).
There are no user serviceable parts within the unit; any
servicing or repairs should only be carried out by Salus Controls
or their appointed agents.
Should the PH60 TRV controller fail to
function correctly, check:
• The batteries are the correct type, fitted correctly
and are not exhausted - fit new batteries if in doubt.
• Heating system is switched on.
• If the PH60 is still not functioning correctly,
press the Reset Button.
32
PH60 INSTRUCTION MANUAL