Slip Station; Both Stations; General Features - NCR 7156 Setup And User Manual

7156 Setup and User's Guide

Slip Station

Both Stations

General Features

Note: The 7156 does not use a paper journal. The journal is kept electronically by
the host computer.
Bi-directional, impact printing
Standard pitch (host selectable): 13.9 characters per inch, 66 columns
Compressed pitch (host selectable): 17.1 characters per inch, 80 columns
Printing of forms up to five plies
Front insertion of forms with forms stop
Side insertion of forms with override of forms stop
Automatic and manual insertion of forms
Form alignment sensors and Slip In LED indicator
Horizontal flat-bed slip table with optional extension (standard with MICR
check reader)
Snap-on ribbon cassette
Variety of print modes: double high (receipt station only), double strike (slip
station only), double wide, upside down, and rotated
Two resident character sets:
PC Code Page 437 (US)
PC Code Page 850 (Multilingual)
16K RAM for downloaded character sets or bit-mapped graphics
(such as logos)
Cover open sensors
Industry standard RS-232C communication interface
History EEROM for custom settings
Power and communication support for a remote 2x20 pass-through display
Audible tone (controlled by application)
Chapter 1: The 7156 Printer
September 1998 3