Selecting Program Category; Tuning In Channels - Mercedes-Benz 2007 CL 550 Operator's Manual

i
Main area 1 can show all channels includ-
ed in your subscription. Which channels are
shown depends on the selected program
category 4.
Note that categories and channels shown in illus-
trations are dependent on programming content
delivered by the service provider. Programming
content is subject to change.
Therefore, channel and categories shown in illus-
trations and descriptions contained in this man-
ual may differ from the channels and categories
delivered by the service provider.

Selecting program category

i
The channels are categorized. Categories al-
low you to tune to stations broadcasting a cer-
tain type of program.
Select "Audio" "Audio"
dio" "Category".
The category list appears.
i
If only the preview channel is activated, only
certain categories are available on the list. Which
categories these are depend on the service
provider.
Select category by rotating
qmr and press n.
sliding
When selecting a channel using the
channel search function or the channel
list, you have access to the channels
you subscribe to and which are includ-
ed in the selected category.
i
When you select the category "All Chan-
nels", you have access to all the channels you
subscribe to, regardless of category, when you
are tuning in a channel using the channel search
function or the channel list.
COMAND satellite radio (USA only)

Tuning in channels

You have the following selection options:
The channel search function
The channel presets
"Sat Ra-
The manual channel number entry
The channel list
Tuning in channels using channel
search function
i
This function is not possible when only the
preview channel is activated. If you try to tune in
ymz
or
a channel in this instance, you will see the
screen described in the section "Satellite radio
service is not activated" ( page 102).
omp
Slide
main area is selected.
Depending on the direction in which
the controller is being pressed or rotat-
ed, the system searches upward or
downward and stops at the next receiv-
able channel.
Control systems
ymz
or rotate when the
103