Cleaning The Media Path - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual
To clean the drive roller and the tear bar
1. Open the stock door.
2. Raise the printhead latch wing and rotate it counterclockwise one-half turn
3. Clean the drive roller with a clean, lint-free cloth moistened with isopropyl
4. Clean the tear bar with a cloth dampened with isopropyl alcohol to remove
5. Lower the printhead, engage the printhead latch, and rotate the latch wing
6. Close the stock door when you are finished.

Cleaning the Media Path

You should clean the media path regularly to keep debris off the media surface
and printhead where irregularities can spoil print quality or damage the
printhead. Cleaning the media guides prevents the media from skewing or
improperly tracking as the media travels through the paper path, which can
result in smeared images and print off the side of the label. If a label jams
during printing, clean the media guides immediately after you remove the label
from the printer.
To clean the media guides and bouncer assembly
1. Open the stock door.
2. Clean the upper and lower media guides and the bouncer assembly with a
3. Close the stock door when you are finished cleaning the printer.
3-6
to unlock the printhead. Lift the printhead to the raised position.
alcohol. Make sure to rotate the roller so that you clean the entire surface of
the roller.
all traces of dust, paper, and adhesive.
clockwise one-half turn to lock the printhead.
clean, lint-free cloth moistened with isopropyl alcohol. Be sure to remove all
traces of debris.