Intermec 4630 User Manual page 134

4630 and 4830 Bar Code Label Printers User's Manual
commands (continued)
Print Fonts, 4-12, 4-13
Print Formats, 4-12, 4-13
Print Graphics, 4-12, 4-13
Print Page, 4-12, 4-13
Print Speed, 2-23
Protocol, 1-13
Security, 2-9
Self-Strip, 2-22
Service menu, 2-7
Selective Transfer, 5-6
Set Warning, 2-24
Stop Bits, 1-13
Translation, 2-21
Units, 2-22
X Forms Adjust, 2-11
Y-Forms Adjust, 2-11
communication boundaries, B-7
communication protocol characters, downloading, B-6
communications
host requirements, B-5
printer serial port, B-8
problems, 4-6
reference information, B-3
RS-232 interface, B-7
RS-422 interface, B-7
RS-485 interface, B-7
specifications, A-4
verifying, 1-14
configuration
default values, 2-27
hardware test label, 2-25
printing test label, 1-9, 2-26
user-defined test label, 2-25
Configuration menu, 2-8
configuring
changing label settings, 2-23
dark adjust, 2-10
printer serial port, 1-13
setting X and Y forms adjust, 2-11
connecting
printer to AS/400, 1-11
printer to mainframe, 1-12
printer to PC parallel port, 1-11
printer to PC serial port, 1-10
Cont key, 2-5
control panel
Alert light, 2-4
Cancel key, 2-4
Feed/Reload key, 2-4
indicator lights, 2-4
On line light, 2-4
On line/Off line key, 2-4
Power light, 2-4
tips for using, 2-9
I-4
using, 2-3
cutter
adjusting label position for, 2-12
Configuration menu command, 2-22
enabling, 2-20
testing operation, 2-21
using, 2-19
Cutter command, 2-20, 2-22
D
dark adjust
optimizing for print quality, 4-15
setting, 2-10
Dark Adjust command, 2-10
Data Bits command, 2-13
data buffer, printing contents, 2-13
Data Line Print command, 1-14, 4-13
direct thermal media, 1-6
downloading, data from sender printer, 5-4
drive roller, cleaning, 3-5
E
EAN, A-10
electrical specification, A-4
Enter key, 2-5
environment, cabling considerations, 1-12
environmental specification, A-4
error codes, 4-11
extended character sets, A-14
F
fanfold media, loading, 1-6
Feed/Reload key, 2-4
font
extended character sets, A-14
specifications, A-5
test printing, 4-12
font tables, A-14
format
designing for print quality, 4-15
test printing, 4-12
G
graphic, test printing, 4-12
H
hardware configuration label, 2-25
head level adjustment bracket, setting, 2-15
heavy-duty cutter
cleaning, 3-7
enabling, 2-20
routing media, 2-19