Turning On Bluetooth Power; Creating An Application That Lets You Print Wirelessly - Intermec CK31 User Manual

CK31 Handheld Computer User's Manual

Turning On Bluetooth Power

By default, Bluetooth power is off, so you need to make sure
that Bluetooth power is on.
Note: If you already configured the CK31 for Bluetooth wireless
scanners (as described in the previous section, "Configuring
Bluetooth Communications for Wireless Scanners") this task is
already complete.
To turn on Bluetooth power
1 From Intermec Settings, select Communications >
Bluetooth.
2 Tap the Power parameter and select On.
3 Save your changes and exit Intermec Settings.

Creating an Application That Lets You Print Wirelessly

The CK31 does not ship with an application that lets you print
wirelessly. You must create an application that opens the wireless
printing COM port on the CK31. For help, see the Bluetooth
Resource Kit. The resource kit is part of the Intermec Developer
Library (IDL), which is available as a download from the
Intermec web site at www.intermec.com/idl.
Chapter 2 — Configuring the CK31
51