Default Configuration - Intermec CK31 User Manual

Appendix B — Default Settings

Default Configuration

148
Use the following tables to see the default configuration settings
of the CK31. If you restore the CK31 to factory default settings,
it will use these values.
The tables are organized according to the options in Intermec
Settings. For detailed information on most of the commands
available in Intermec Settings, see the Intermec Computer
Command Reference Manual (P/N 073529). The Intermec
Computer Command Reference Manual is available on the CD
attached to the inside front cover of this user's manual. You can
check the Intermec web site for a more recent version of this
online manual.
Default Scanner Configuration
Symbology
AustraliaPost
Aztec
BPO
Codabar
Codablock A
Codablock F
Code 11
Code 2 of 5
Code 39
Code 93
Code 128
DataMatrix
DutchPost
EAN.UCC Composite
Interleaved 2 of 5
JapanPost
Matrix 2 of 5
Maxicode
Micro PDF417
Default Value
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
CK31 Handheld Computer User's Manual