Intermec CK31 User Manual page 52

CK31 Handheld Computer User's Manual
Chapter 1 — Using the CK31 Handheld Computer
4 Push the card into the slot until it latches in place.
5 To verify that the SD card is seated correctly, press I to turn
on the CK31.
• If the SD card is bootable, the CK31 should boot from the
card. If not, see page 115 for troubleshooting help.
• You should be able to navigate to the SDMMC Disk
folder to see the contents of the SD card. If not, see page
115 for troubleshooting help.
• If the SD card contains operating system upgrade files, the
upgrade process begins automatically. For more
information, see "Upgrading Your CK31" on page 92.
6 Replace the door and attach it with the two captive screws.
7 Press I to turn on the CK31.
CK31
SD card
SD card
door
Captive
screw
(2 places)
35