Booting The Ck31; Warm Booting The Ck31; Cold Booting The Ck31 - Intermec CK31 User Manual

Booting the CK31

Warm Booting the CK31

Cold Booting the CK31

CK31 Handheld Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CK31
You seldom need to warm or cold boot the CK31. The CK31
uses the configuration currently saved in flash memory during
the boot process.
You need to boot the CK31 when an application is locked up
and will not respond, when you upgrade the firmware, or when
you reflash the computer. The next instructions explain how you
warm and cold boot the CK31.
If your charged CK31 does not resume after pressing I, or if the
computer or an application is locked up, you may need to warm
boot it.
To warm boot the CK31
• Press and hold I for 5 seconds. The CK31 tells you it is
performing a warm boot and the screen comes back up to the
start screen.
If the CK31 or application is locked up and does not respond to
a warm boot, follow this procedure to perform a cold boot.
When you perform a cold boot, all data in your RAM storage is
deleted. To make a backup copy of everything in your RAM-
based storage system, see "Backing Up Your Files" on page 91.
To cold boot the CK31
Remove the battery.
1
Using a small pointed device (such as the end of the stylus),
2
press the reset switch on the backside of the CK31.
125