Intermec CK31 User Manual page 71

Chapter 2 — Configuring the CK31
54
If your preferred printer does not appear, make sure the
printer is powered on and discovery is enabled, and then
repeat Steps 1 through 3.
Note: Bluetooth devices that are not printers may be
displayed on this screen even though the Show Printers
Only check box is checked.
4 Tap Test Print. The printer prints a short message, verifying
that the printer has been selected as the current wireless
printer.
To manually enter the device address of the printer
1 Select Start > Settings > Control Panel and double-tap the
Wireless Printing icon. The Wireless Printing dialog box
appears.
2 Select Manual and tap Acquire Printer. The Manual Set
dialog box appears.
CK31 Handheld Computer User's Manual