Programming A Virtual Key Or Unicode Character - Intermec CK31 User Manual

Programming a Virtual Key or Unicode Character

CK31 Handheld Computer User's Manual
7 Select the Entry Mode for the Unicode character.
Entry Mode Description
Literal You enter the actual character that the key
combination produces.
Hex You enter a hex string. The hex string must be
preceded by 0x. The range is from 0x0 to
0xFFFF.
You enter a decimal string. The range is from 0
Decimal
to 65535.
8 Press Tab or tap in the text box to select the Enter New
Character text box.
9 Type the new character or string and press Enter. A dialog
box appears asking if you want to commit your new entry to
permanent storage.
10 Tap Yes or No.
You can program any Virtual Key or Unicode character to any
key or modified key combination.
To program a Virtual Key or Unicode character
1 Start the reprogrammable keypad utility.
2 Press the key you want to reprogram twice. The hexadecimal
scan code for the key appears in both fields.
3 Press Enter. The select modifiers dialog box appears.
Appendix C — Reprogramming the Keypad
159