7-14
Physical and Operating Specifications
DVD-ROM Drive
Disk
Data Transfer Rate:
(1KB = 1024 Bytes)
Bus Rate:
Cache/Buffer:
Start-Up Time:
Stop Time:
Error Rates:
Reliability:
Indicators:
AUDIO INTERFACE
Line Out Connector:
RMS Output Voltage
S/N Ratio
Channel Separation
THD & Noise
Frequency Response
ELECTRICAL
DC Input Power Requirements:
5 VDC ± 5%,
12 VDC ± 5%,
DC Current:
Continued
150 KB/s (sustained, 1X CD-ROM mode)
1200 - 4800 KB/s (32X CAV CD-ROM mode)
2705 - 8115 KB/s (6X CAV DVD mode
16.6 Mbytes/s (burst) with DMA support
512 KB (Minimum
< 10 seconds (typical)
< 3 seconds (typical)
-15
10
(soft error)
-20
10
(hard error)
-6
10
(seek error)
35,000 POH, 25% (MTBF)
30 minutes (MTTR)
>20, 000 drawer in/out cycles
6
> 5 x 10
full stroke seeks
Busy LED (Amber or Green)
0.7 Vrms (typical)
85 dB (minimum)
65 dB (minimum)
0.1% @ 1 kHz
20 to 20 kHz, ±2 dB
100 mV ripple p-p
200 mV ripple p-p
Continued
Need help?
Do you have a question about the AP200 and is the answer not in the manual?
Questions and answers