Modulation Mode - Hammond XK-2 Quick Features Manual

Modulation Mode

This Advanced Feature allows you to assign the internal function of the XK-2 that the Modulation Wheel will control. You
can select "OFF," "LES S/F" (the LESLIE FAST Touch Button will turn "ON" or "OFF") or "OVERDRIVE". The
default setting is "OFF."
TRY THIS:
1.
2.
3.
4.
Use the VALUE ">" Select Touch Button to scroll up through the choices.
Use the VALUE "?" Select Touch Button to scroll down through the choices.
NOTE: You can exit by touching the EDIT Select Touch Button.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
EDIT PARAMETER
Touch the INT.CONT./EXT.ZONE Select Touch Button once. The Information Center Display should
look like this:
}34
SPLIT POINT 2B
Touch the PAGE "<" Select Touch Button six times. The Information Center Display should look like
this:
}40
Now select the option you wish by doing the following:
Select
SPLIT1
MOD. MODE
OFF
Special Advanced Features
Hammond XK-2 Quick Features Guide
91