Receive Transpose On / Off - Hammond XK-2 Quick Features Manual

74 MIDI
MIDI Receive Transpose ON / OFF
This Advanced Feature allows you to transpose incoming MIDI Note data. You can transpose the data up or down 6 half-
steps (-6 ~ +6). The default setting is "0".
TRY THIS:
1.
2.
3.
4.
Use the VALUE ">" Select Touch Button to raise the pitch by semitones.
Use the VALUE "?" Select Touch Button to lower the pitch by semitones.
NOTE: This setting DOES NOT affect the pitch of the XK-2 Drawbar or Percussion tones. For information on
how to transpose the XK-2 itself, see page 95.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
Hammond XK-2 Quick Features Guide
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
EDIT PARAMETER
Touch the SYSTEM Select Touch Button once. The Information Center Display should look like this:
{10 MIDI1
UM
Touch the PAGE "<" Select Touch Button twenty times. The Information Center Display should look
like this:
{30 MIDI21
Rx TRANSPOSE
Now select the option you wish by doing the following:
Select
CHANNEL 1
0