Modulation Wheel Controller Number - Hammond XK-2 Quick Features Manual

Drawbar keyboard

Table of Contents

MIDI

MIDI Modulation Wheel Controller Number

This Advanced Feature allows you to select the Controller number for the Modulation Wheel. The default setting is "1"

(Vibrato).

TRY THIS:

Use the VALUE ">" Select Touch Button to scroll up through the numbers.

Use the VALUE "?" Select Touch Button to scroll down through the numbers.

This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System

Parameter List.

NOTE: You can exit by touching the EDIT Select Touch Button.

Hammond XK-2 Quick Features Guide

Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display

should look like this:

EDIT PARAMETER

Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like

this:

{10 MIDI1

Touch the PAGE "<" Select Touch Button eight times. The Information Center Display should look like

this:

{18 MIDI9

MOD.

Now select the option you wish by doing the following:

Select

CHANNEL

CTR# 1

Table of Contents