Split Mode - Hammond XK-2 Quick Features Manual

32 Manual Split
Ë Split Mode
This Advanced Feature allows you to select how the XK-2 will function when Split is active. You can select from : "UM +
LM" (Upper Manual to the right of the Split Point and Lower Manual to the left of the Split Point), "UM + PK (Upper
Manual right of Split and Pedal Keyboard left of Split) or "LM + PK" (Lower Manual right of Split and Pedal Keyboard left
of Split). You will find this feature particularly useful if you are using another keyboard along with your XK-2 or two XK-2's
connected together via MIDI to simulate "B-3" (two-manuals-and-pedals) operation.
NOTE: The Split Touch Button must be "ON" (red LED lit) in order to hear the effect of this feature.
TRY THIS:
1.
2.
3.
4.
Use the VALUE "<" Select Touch Button to scroll up through the selections.
Use the VALUE "=" Select Touch Button to scroll down through the selections.
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
Hammond XK-2 Quick Features Guide
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
EDIT PARAMETER
Touch the INT.CONT/EXT.ZONE Select Touch Button once. The Information Center Display should
look like this:
}34
SPLIT POINT 2B
Touch the PAGE "<" Select Touch Button once. The Information Center Display should look like this:
}35
Now select the option you wish by doing the following:
Select
SPLIT1
SPLIT2
MODE UM+LM