Hammond XK-2 Quick Features Manual page 61

MIDI Expression Control
This Advanced Feature allows you to control how Expression data (Controller #11) is sent from the XK-2. The default
setting is "INDIV," meaning that Expression data is received individually for Upper, Lower and Pedal on whatever MIDI
Channel each is set for. However, on personal keyboards and home organs by certain manufacturers, Expression data is
transmitted on one MIDI Channel only. By using this parameter, you can select on which MIDI channel the XK-2 will
receive. In this way, all sounds from the XK-2 can be under expression while receiving Expression data on only one MIDI
Channel. (NOTE: If you are also using the Keyboard Split function of the XK-2, the MIDI channel setting for the
Expression Control parameter must be the same as the MIDI channel setting for the Upper Manual in order for the
entire instrument to receive expression.)
TRY THIS:
1.
2.
3.
4.
Use the VALUE ">" Select Touch Button to scroll up through the choices.
Use the VALUE "?" Select Touch Button to scroll down through the choices.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
EDIT PARAMETER
Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
{10 MIDI1
UM
Touch the PAGE "<" Select Touch Button three times. The Information Center Display should look like
this:
{13 MIDI4
EXP. CTR
Now select the option you wish by doing the following:
Select
CHANNEL 1
INDIV.
MIDI
Hammond XK-2 Quick Features Guide
57