Drawbar Volume - Hammond XK-2 Quick Features Manual

Drawbar keyboard

Table of Contents

Ë Drawbar Volume

Although the Drawbars give you individual control over each harmonic, you may still want to balance registrations for the

manuals and pedals. This Advanced Feature allows you to set the volume of the Drawbar registrations for the following: (1)

Upper Manual ("UM"), (2) Lower Manual ("LM") and (3) Pedal Keyboard ("PK"). You may select from "0" to "127" for

each manual and pedals.

TRY THIS:

Use the PAGE "<" Select Touch Button to scroll forward through the manual selections ("UM" or Upper Manual, "LM"

or Lower Manual, and "PK" or Pedal Keyboard). As you scroll forward through the Manual selections, you will see the

upper left-hand corner of the display change from "S4" to "S5" to "S6."

Use the PAGE "=" Select Touch Button to scroll backward through the manual selections.

Use the VALUE ">" Select Touch Button to scroll up through the volume increments.

Use the VALUE "?" Select Touch Button to scroll down through the volume increments.

This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System

Parameter List.

NOTE: You can exit by touching the EDIT Select Touch Button.

Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display

should look like this:

EDIT PARAMETER

Touch the SYSTEM Select Touch Button. The Information Center Display should look like this:

Touch the PAGE "<" Select Touch Button three times. The Information Center Display should look like

this:

Now select the option you wish by doing the following:

Select

MASTER TUNE

440Hz

DB VOLUME1

127

*default setting

Drawbars

Hammond XK-2 Quick Features Guide

Table of Contents