Important Safety Instructions - Hammond XK-2 Quick Features Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING - As with any electrical or electronic equipment, care
should be exercised to prevent fire and shock hazard. The
following information is provided to give guidance in the safe
use of your Hammond Keyboard.
Read all of the instructions before using this product.
To reduce the risk of injury, close supervision is necessary when
the product is used near children.
Do not use this product near water.
This product, either alone or in combination with an amplifier
and speakers or headphones, may be capable of producing
sound levels that would cause permanent hearing loss. Do not
operate for a long period of time at a high volume level or at
a level that is uncomfortable. If you experience any loss or
ringing in the ears, you should consult an audiologist.
This product should be located so that its location or position
does not interfere with its proper ventilating
The product should not be located away from heat sources
such as radiators, heat registers or other products that produce
heat.
This product should be connected to a power source only of the
type described in the operating instructions or as marked on
the product.
The power-supply cord should be unplugged from the outlet
when left unused for a long period of time. When unplugging
the power supply cord, do not pull on the cord, but grasp it by
the plug.
Care should be taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
WARNING: TO AVOID THE HAZARDS OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR OTHER MOISTURE.
DANGER: Improper grounding of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
SAVE THESE INSTRUCTIONS
IF YOUR INSTRUMENT FAILS TO OPERATE:
1. Be sure your POWER ON/OFF switch is ON, and the MASTER
VOLUME is set to at least the half way point.
2. Be sure that at least one voice is selected ON.
3. Make certain that the power cord is plugged in and the
"AC" wall receptacle is not faulty.
In the event that the instrument is still inoperable, your
Hammond Dealer is best qualified to provide competent
service.
THIS PRODUCT SHOULD BE SERVICED BY QUALIFIED SERVICE
PERSONNEL WHEN:
A. The power-supply cord or plug has been damaged.
B. Objects have fallen, or liquid has been spilled, into the
product.
C. The product has been exposed to rain.
D. The product does not appear to operate normally or
exhibits a marked change in performance.
E. The product has been dropped or damaged.
Do not attempt to service this product beyond that described
in the user maintenance instructions. All servicing should be
referred to qualified service personnel.
This product must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounded
conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.