Long Range Wireless Access Point / Client Bridge
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into
the Confirm Password field.
Click on the Apply button to save the changes.
5.5.2 SNMP Settings
Click on the SNMP Settings link under the Management menu. This option
allows you to assign the contact details, location, and community name and trap
settings for SNMP. This is a networking management protocol used to monitor
network‐attached devices. SNMP allows messages (called protocol data units) to
be sent to various parts of a network. Upon receiving these messages, SNMP‐
compatible devices (called agents) return data stored in their Management
Information Bases. .
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Read‐Only Community Name: Specify the password for access the SNMP
community for read only access.
Read‐Write Community Name: Specify the password for access to the SNMP
community with read/write access.
Version 1.0
38