Long Range Wireless Access Point / Client Bridge
Save a copy of the current settings: Click on the Backup button to save the
current configuration.
Restore saved settings from a file: Once a file has been backed up, you may
restore it by clicking on the Browse button to select the file, and then the
Restore button.
Revert to factory default settings: Click on the Factory Default Settings button to
reset the device to the default settings. Please wait while the device restart and
then access the device using the default IP address: 192.168.1.1
6.6.4 Firmware Upgrade
Click on the Upgrade Firmware link under the Management menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
Version 1.0
58