Long Range Wireless Access Point / Client Bridge
4.5.1 Administration
Click on the Administration link under the Management menu. This option
allows you to create a user name and password for the device. By default, this
device is configured without a user name and password admin. For security
reasons it is highly recommended that you create a new user name and
password.
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into
the Confirm Password field.
Click on the Apply button to save the changes.
4.5.2 SNMP Settings
Click on the SNMP Settings link under the Management menu. This option
allows you to assign the contact details, location, and community name and trap
settings for SNMP. This is a networking management protocol used to monitor
network‐attached devices. SNMP allows messages (called protocol data units) to
be sent to various parts of a network. Upon receiving these messages, SNMP‐
compatible devices (called agents) return data stored in their Management
Information Bases. .
Version 1.0
24