Long Range Wireless Access Point / Client Bridge
Click on the Browse button and then select the appropriate firmware and then
click on the Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power
off the device during this process as it may crash the device and make it
unusable. The device will restart automatically once the upgrade is complete.
6.6.5 Time Settings
Click on the Time Settings link under the Management menu. This page allows
you to configure the time on the device. You may do this manually or by
connecting to a NTP server.
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list
and then specify the IP address of the NTP server.
Click on the Apply button to save the changes.
6.6.6 Log
Click on the Log link under the Management menu. The Log page displays a list
of events that are triggered on the Ethernet and Wireless interface. This log can
be referred when an unknown error occurs on the system or when a report
needs to be sent to the technical support department for debugging purposes.
Version 1.0
59