Long Range Wireless Access Point / Client Bridge
6.6.1 Administration
Click on the Administration link under the Management menu. This option
allows you to create a user name and password for the device. By default, this
device is configured without a user name and password admin. For security
reasons it is highly recommended that you create a new user name and
password.
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into
the Confirm Password field.
Remote Management: Choose to enable or disable remote management.
Remote Upgrade: Choose to enable or disable remote firmware upgrade.
Remote Management Port: Specify a port for remote management. For example,
if you specify 8080, then you will need to specify <IP address>:<port>
192.168.1.1:8080 to connect to the web interface of the device.
Click on the Apply button to save the changes.
Click on the Management link on the
navigation drop‐down menu. You will
then see six options: administration,
SNMP settings, backup/restore settings,
firmware upgrade, time settings, and log.
Each option is described below.
Version 1.0
56