Wireless Advanced Settings; Management - EnGenius EOC?5610 User Manual

Long Range Wireless Access Point / Client Bridge
6.5.2.3 Wireless Advanced Settings
Click on the Wireless Advanced Settings link. On this page you can configure the
advanced settings to tweak the performance of your wireless network. Options
available are: data rate, transmit power, fragmentation threshold, RTS threshold,
protection mode and distance.
Data Rate: If you would like to force a data rate, you may select one from the
drop‐down list. However, for best performance it is recommended to use the
Auto setting.
Transmit Power: You may have the different application distance of the device
by selecting a value from the drop‐down list. This feature can be helpful in
restricting the coverage area of the wireless network.
Fragment: Packets over the specified size will be fragmented in order to improve
performance on noisy networks.
RTS Threshold: Packets over the specified size will use the RTS/CTS mechanism
to maintain performance in noisy networks and preventing hidden nodes from
degrading the performance.
Protection Mode: If your wireless network is using both 802.11b and 802.g
devices then it is recommended to enable this feature so that the 802.11b
devices will not degrade the performance of 802.11g devices.
WMM: Enable wireless Quality of Service
Distance (1‐30km): Specify a distance between 1 and 30Km.
Click on the Apply button to save the changes.
6.6 Management
Version 1.0
55