Long Range Wireless Access Point / Client Bridge
1 Introduction
EOC‐5610 is a long range outdoor wireless Access Point / Client Bridge that operates in
both 5GHz and 2.4GHz frequency. It provides high bandwidth up to 108Mbps with
Super Mode (SuperA/G) and features high transmitted output power as well as
superior sensitivity. EOC‐5610 extends radio coverage, avoids unnecessary roaming
between Access Points and ensures a stable wireless connection while reduces the
number of required equipments.
EOC‐5610 provides user friendly interface including user friendly distance control
ranges from 1KM up to 30KM and RSSI LED indicator offering real time signal status. It
comes with PoE injector for convenient outdoor installation.
EOC‐5610 enforces transmission security with full support of latest encryption
mechanism including 64/128‐bit WEP, WPA and WPA2. With 13dBi internal antenna
and superior performance, EOC‐5610 makes an optimal wireless solution for both
small and large scale projects.
1.1
Features
Wireless
5GHz / 2.4GHz It works in 5GHz / 2.4GHz frequency spectrum
-
High output power Transmit output power programmable for different
-
country selections
-
High Data Rate High speed transmitting rate up to 108Mbps with Super
Mode, supports large payload such as MEPG video streaming
Multifunction application Access Point/Client Bridge/Client Router
-
-
Long range transmitting Transmit power control and distance control (ACK
timeout)
Signal Strength LED indicators have the best transmit and receive signal for
-
traffic communication
-
Public wireless solution An AP interface that is especially useful in public areas
such as hotspots and enterprise
Signal Strength Display RF signal strength status shown LEDs of 3 colors,
-
making network build‐up easier
BSSID Basic Service Set ID, supports 4 MAC address
-
Networking
-
QoS(WMM) Enhance performance and density
PPPoE Point‐to‐Point Protocol over Ethernet at Client Router mode. This
-
function will keep trying when failed or disconnected
Version 1.0
5