Long Range Wireless Access Point / Client Bridge
2.3
Mounting Kits
The images below depict the standard and optional mounting kits.
Standard
Pole Mount
2.4 IP Address Configuration
This device can be configured as a Bridge/Router or Access Point. The default IP
address of the device is 192.168.1.1 In order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network Connections and then double click on
the connection of your Network Interface Card (NIC). You will then see the
following screen.
Optional
Wall Mount
Version 1.0
Optional
Window Mount
10